pbp10-005g thru pbp10-10 page: 1 frontier electronics corp. 667 e. cochran street, simi valley, ca 93065 tel: (805) 522-9998 fax: (805) 522-9989 e-mail: frontiersales@frontierusa.com web: http://www.frontierusa.com 10a silicon single-phase glass passivated bridge rectifiers pbp10-005g thru pbp10-10g features z current rating 10a z glass passivated junction z reverse voltage rating up to 1000v z typical ir less than 1 a z high temperature soldering guaranteed: 260 c /10 second mechanical data z case: void-free plastic package, dimensions in inches and (millimeters) z terminals: leads, solderable per mil-std-202, method 208 z mounting position: any z weight: 5 grams maximum ratings and electrical characteristics ratings at 25 c ambient temperature unless otherwise specified single phase, half wave, 60 hz, resistive or inductive l oad. for capacitive load, derate current by 20% ratings symbol pbp10 -005g pbp10 -01g pbp10 -02g pbp10 -04g pbp10 -06g pbp10 -08g pbp10 -10g units maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified output current at tc=55 c i o 10.0 a peak forward surge current single sine-wave superimposed on rated load i fsm 175 a storage temperature range t stg - 55 to + 150 c operating temperature range t op - 55 to + 150 c electrical characteristics (at t a =25 c unless otherwise noted) characteristics symbol pbp10 -005g pbp10 -01g pbp10 -02g pbp10 -04g pbp10 -06g pbp10 -08g pbp10 -10g units maximum instantaneous forward voltage drop at 5.0a v f 1.1 v maximum reverse current at rat-ed dc blocking voltage per element ta=25 i r 5 a hole for #6 screw 0.158(4.0) 0.142(3.6) 0.094(2.4) x 45 chamfer 0.770(19.50) 0.730(18.54) 0.445(11.3) 0.405(10.3) 0.107(2.72) 0.067(1.70) 0.290(7.37) 0.210(5.33) .750 (19) min 0.300(7.6) 0.250(6.35) 0.50(1.27) typ.dia.
pbp10-005g thru pbp10-10 page: 2 ratings and characteristic curves pbp10-005g thru pbp10-10g fig. 2 - typical reverse characteristics at t j =25 10 1.0 0.1 .01 instantaneous reverse current, microamperes 0 20 40 60 80 100 120 140 percent or rated peak reverse voltage 1000 500 100 50 10 5 1.0 0.1 fig. 3 - typical instantaneous forward characteristics instantaneous forward current, amperes 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 instantaneous forward voltage, volts t j =25 300us pulse width 1% duty cycle fig. 1 -maximum output rectified current 15 10 5 0 average forward output current, amperes 20 40 60 80 100 120 140 160 18 0 case temperature t c with (100mm 2 1.5mm) copper t j = 150
|